Chinese Phones
مشرف سابق
عدد المشاركات : 104
عدد النقاط : 5707
مستوى التقييم : 13
تاريخ التسجيل : 01/03/2011
 | | موضوع: How To Make China Phone Flash Cable كيفية عمل كابل فلاش الصيني الخميس مارس 17, 2011 11:47 am | |
| How To Make China Phone Flash Cable
كيفية عمل كابل فلاش الصيني
Many of new member face the problem, how they
make a usb to com cable for flash his china phone. with this usb to com
cable any one can use free soft for do software operation on his
phone.
with a usb to com cable
(as like ringtone cable) you can make your own cable for flashing,
format, ect for china phone.
i explain here with a
Motorola c261 usb ringtone cable, its always do better work for me.
first
collect a cable of Motorola c261 usb ringtone cable (available in
market) like this-
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
in cable
middle have intact a box by plastic. in it have a mini pcb. need to open
this
mini box for see and work on it. see picture- [ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة] after open
it, now we see a mini pcb, its one side have 5 cable, which is connect
to pc usb, no need to touch it. its ok.
we work on pcb opposite cable connection, here have 3 cable. 1 tx, 1rx,
1gnd. see pic- [ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة] here have 3
cable, now make a connection for V+ or B+. when we flashing our phone
we need power supply for flash phone. so connect a cable with clip in
this point, just use a diod from pc usb V+, see picture-
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
for cable driver, use it motorola usb to com cable drive or you can use
PL2303 USB driver.
connect cable tx rx gnd B+ to phone tx rx gnd B+ and work your phone.
now we found our won cable for flashing china phone.
for expert user : now you can collect a RJ45 connector. than join tx rx
gnd in in RJ45 Socket. now you use any rj45 cable with it. and place it
on any box, as like in any reject device, open box and leave it old pcb
than place this pcb in it. and V+/B+ cable and clip stay in out or side
for give power supply to phone. now you found a complete china
box/device and use it. | |
|
